Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 6
MODEL
GDP
ISO 03: Into P or out of T
CAVITY: T-13A
Check, On P
Check, On T
TECHNICAL DATA
Body Type Sandwich
Interface ISO 03
Body Features Into P or out of T
Stack Height 44,5 mm
Open Cavities 1
Cavity T-13A
Model Weight 0.26 kg.
INCLUDED COMPONENTS
Part Description Quantity
500-001-012 O-Ring 4
700-002 Seal Plate 1
811-001-006 Pin 1
MODIFIER
6061-T651 Aluminum, Buna-N
/S 65-45-12 Ductile Iron, Buna-N, Blackened
/V 6061-T651 Aluminum, Viton
/Y 65-45-12 Ductile Iron, Viton, Blackened
snhy.com/
GDP
MANIFOLD FACES
FACE GRID
NOTES
For check valve application, use only with CX*A check valves - free flow nose to side.
Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port
type/size specified.
Model Code Example: GDP
CONFIGURATION OPTIONS
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 6
1 2 3 4
5 6 7 8
9 10 11 12
Face 2
Face 6
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 3 of 6
Face 7
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 4 of 6
Face 8
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 5 of 6
Face 10
Created on 12/15/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 6 of 6
